Gutter installation cost in NJ (2026)
Cost by home size
| Home | Approx. gutter footage | Typical installed cost |
|---|---|---|
| 1-story ranch | ~150 ft | $1,100–$1,900 |
| 2-story colonial | ~200 ft | $1,600–$2,900 |
| Large 2–3 story | ~250–300 ft | $2,400–$4,500 |
| Estate / complex roofline | 300+ ft | $4,500–$11,000+ |
Cost by material
| Material | Per linear foot | Notes |
|---|---|---|
| Vinyl | $4–$8 | Cheapest; gets brittle in NJ winters |
| Aluminum (seamless) | $7–$13 | The NJ default — best value |
| Galvanized steel | $9–$18 | Stronger, but can rust |
| Copper | $25–$45 | 50–100 yr life; historic homes |
What drives the price up
Height — a 3-story job takes staging and more labor. Size — 6-inch gutters cost more per foot than 5-inch but handle far more water. Fascia repair — rotted board behind the old gutter is the most common change-order; budget $8–$15/ft if it's soft. Downspouts — usually $8–$12/ft, and more of them means better drainage. Tear-off — $1–$2/ft. Guards — add $1,800–$4,500 if bundled.
How to read a gutter bid
A real quote states: linear feet of gutter, gutter size (5" or 6"), material and gauge (.027 vs .032 aluminum — thicker is better), number and size of downspouts, hanger type and spacing, whether tear-off/disposal is included, fascia repair terms, and warranty on both material and labor. A one-line "gutters: $2,200" tells you nothing and hides everything.
Cheap bids that get expensive
Watch for: thin .027 aluminum quoted against a competitor's .032; spike-and-ferrule hangers instead of hidden hangers; tear-off excluded; too few downspouts (the runs will overflow no matter how good the gutter); and fascia repair left as "TBD."
Get 3 free installation quotes →
FAQ
How much does it cost to install gutters in NJ?
Most New Jersey single-family homes pay $1,400–$3,800 for new seamless aluminum gutters in 2026 — roughly $7–$13 per linear foot installed. Small ranches land near the bottom; large multi-story homes with copper or complex rooflines run well above it.
How much is gutter installation per foot?
Seamless aluminum runs about $7–$13 per linear foot installed in NJ. Steel is $9–$18, copper $25–$45, and vinyl $4–$8. Price per foot rises with roof height, gutter size, and access difficulty.
Does gutter installation include removing the old gutters?
Usually yes, but confirm it in writing. Tear-off and disposal typically adds $1–$2 per linear foot, and some low bids exclude it — which is a common way a cheap quote becomes an expensive surprise.
How long does gutter installation take?
Most single-family homes are done in one day. Seamless gutters are roll-formed on-site, so the crew fabricates and hangs runs the same visit. Complex or multi-story homes with fascia repair may take two.
Related: Seamless vs sectional · 5" vs 6" gutters · Repair or replace?